[tintuc]

Bước 1:

1.1 Connect an Ethernet cable from a computer to eth0 of the EdgeRouter.
1.2 Change the IP address of your computer to an address in the 192.168.1.0/24 range, such as 192.168.1.11

1.3 Open a Web Browser and enter 192.168.1.1 in the address bar.


1.4 Log into the router using the default username and password: ubnt/ubnt


1.5 Confirm that the EdgeRouter is on the latest firmware found on our downloads page. If not, make sure to upgrade it. This article demonstrates how: EdgeRouter - Upgrading EdgeOS Firmware.

Bước 2 : Run Wizard


Tuỳ vào phương thức cài đặt chạy theo DHCP hoặc Pppoe chọn mục đó . Xong Save là ok.


[/tintuc]

BACK TO TOP